19
9. Function Setting
Select “Settings” in the main menu to enter an interface shown in Figure 25. You
can select the object according to your need by pressing “Up” and “Down” buttons.
Press “Enter” to enter the corresponding setting interface. After
completing these
sett
ings, press “Enter” button to save the settings and return to the previous
menu.
Figure 25 Other Settings Interface
a)
Select “Settings” - “Auto Save” to enter an interface shown in Figure 26. This
interface enables you to set measured data automatically or not. Select
“Open”, each sample data and standard data will be saved automatically.
Select “OFF”, data will not be saved automatically.
Figure 26 Auto Save Interface
b)
Select “Time” to enter time setting interface, as shown in Figure 27. You can
