7
Figure 5 Main Menu
Figure 6 Manual Calibration
（
II
）
Measurement
1. Locating and Measuring Method
200 colorimeter is locating through the facula. The
method: enter “Standard
Measurement” or “Sample Measurement” interface, press the “Testing” key and
hold it. The facula will appear at the moment. You can observe the matching
status between the facula and the measured sample. At the same time, hold the
measuring aperture close to the measured sample and adjust it. Then the
alignment is achieved.
After the locating, release “Testing” button. The instrument will finish sample
testing in approx. 1 sec and display color parameters of the measured sample.
2. Standard Measurement
There are two conditions about standard measurement. One is performing
standard measurement after power on; another is after completing sample
