8
measurement or other operations, press “Back” button continuously to enter
standard measurement.
a) Standard Measurement after Power On
After power on, the colorimeter will display “Standard Measurement”, as shown in
Figure 7. Then, align measuring aperture to the standard, press “Testing” key, the
screen will display color parameters of this standar
d. Press “Enter” button, the
instrument will enter “Sample Measurement” interface.
Figure 7 Standard Measurement Interface
b) Standard
Measurement
after
Completing
Sample
Measurement or Other Operations
After completing sample measurement or other operations, the instrument may
display an interface. At this moment, press “Back” button repeatedly until the
interface back to “Standard Measurement” interface, as shown in Figure 7. Then,
perform standard measurement according to step a).
3
．
Sample Measurement
After completing standard measurement, press “Enter” button, the instrument will
enter “Sample Measurement” interface automatically, as shown in Figure 8. Align
the measuring aperture to the test sample to perform sample measurement.
