12
V. System Function Description
Except “Standard Measurement” and “Sample Measurement” interfaces, you should enter
other function interfaces through the main menu. Main menu is shown in Figure 13.
Figure 13 Main Menu Interface
1. Record and Standard Entering
a) Record
Select “Record” in main menu to enter “Standard Record”, as shown in Figure 14.
The figure shows the standard parameters. You can check different standard data
through “Up” and “Down”. In figure 15, “T002” is a standard number. After
selecting a standard, you can press “Enter” to check sample parameters and
color difference parameters, as shown in Figure 15. You can check different data
through
“Up” and “Down”. No.001 in Figure 15 is the serial number of sample
measurement.
Figure 14 Standard Record
