manualshive.com logo in svg

MR OILTAP R, Installation And Commissioning Instructions

Share
Download
MR OILTAP R Installation And Commissioning Instructions Download Page 34

5 Mounting

Maschinenfabrik Reinhausen GmbH 2015

34

4427410/00 EN

OILTAP® R

Mounting

 WARNING

 

Risk of crushing from moving parts!

When the on-load tap-changer undertakes a tap-change operation, compo-
nents move on the selector and change-over selector, some of which are
freely accessible. Reaching into the selector or change-over selector during
a tap-change operation may result in serious injuries.
► Keep at a safe distance of at least 1 m during tap-change operations.
► Do not reach into the selector or change-over selector during tap-

change operations.

► Do not switch the on-load tap-changer when working on the selector

and change-over selector.

This chapter describes how to install the on-load tap-changer in a transform-
er and how to dry it. Installation in both a standard version transformer and a
bell-type tank transformer is described. Regardless of the transformer ver-
sion, undertake the preparatory work before starting to install the on-load
tap-changer in the transformer.

Preparatory work

Perform the work stated below before installing the on-load tap-changer in
the transformer.

5

 

5.1

Summary of Contents for OILTAP R















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands