System Features
12
Hardware
3.5
Dispenser
3.5.1
Figure 3: Standard dispenser
The dispenser has a lock function to make water tapping easier. Moreover, the dispenser
will stay in a fixed position which has increased its flexibility (no draw back function) and
gives the user more comfort when tapping water. This has been set as a standard
dispenser for pure water system and memtap system (optional).
Control PCB (printed circuit board)
3.5.2
The Water system has a control pcb which provides communication between the main
computer system and analog- & digital-sensors. This pcb has been flashed with a firmware
(Firmware-Version 0.13.8) with a watchdog function. If there is any problem with sensor
reads, this control pcb will restart the system automatically after ca. 2 minutes.
IEC Socket
3.5.3
The system is provided with a power cable with an IEC socket (Figure 4: IEC socket). This
socket is a universal socket which has been used in the most electronic devices (PC,
monitor, etc.).
Trigger
Pressure pin
