System Control Panel
22
Exporting Data
5.2.4
-
Press the button ”Export Data”
* Please make sure that there is a USB-stick
(max. 4 GB, in FAT-format) connected to the USB-port!
-> copy files from
\Nandflash\...
into
\Hard Disk\…
-
-
Then click “CONFIRM” to save data to USB-Stick:
o
chart data
o
config.mcf
o
calib.mcf
o
operating hours
Prod. to max level
5.2.5
This tool is used to fill up the tank to the maximum level, which has been set by the two
tank level sensors.
-
Press the button „Prod to max level”
The system will produce water until both tank level
sensors (bottom and top) are active. It is very useful
if user needs water more than 10 l at once.
Process visualization
5.2.6
-
Press the button „System-Status”
-
The entire process is illustrated schematically
-
Currently active components such as solenoid
valves, pumps appear in light
green
. Straight inactive
in
dark green
-
The switched on UV lamp in
turquoise
