System Control Panel
19
System Control Panel
5
Normal operation mode
5.1
If the Aquinity² P10 is connected to power supply, the system jumps in normal operation
mode automatically. By default, the main information screen is displayed. The entire
process is fully automatic controlled.
Figure 12: Main information screen Aquinity² P10
Tools
5.2
The "Tools" selection contains functions for changing consumables and for process
visualization.
Changing the consumables
5.2.1
These following steps are used to change either ProPak or UPW-Pak. The steps are similar
for both consumables. But they have different internal process which runs automatically.
-
Press the button ”CHANGE ProPak”
or
press the button “CHANGE UPW-Pak”
Tank level should be full to change the UPW-Pak. If tank
level is not full, the tool aborts automatically.
Main information
screen
Tools
History
User setup
Conductivity permeat
Ultra pure water
conductivity and
temperature
Tank level
Status bar
