Installation and start up
membra
Pure
GmbH
Wolfgang-Küntscher-Str.14
16761 Hennigsdorf
Germany
Tel.: +49 (0) 3302/201-20 0
Fax.: +49 (0) 03302/201-20 21
E-Mail: [email protected]
Internet: www.membrapure.de
page 22
4.9
Sterile filter attachment
Figure 13: sterile filter
Install the sterile filter with caution to avoid damage to the filter or to the device!
-
To avoid any leaks, wrap the threads of the sterile filter with teflon tape.
-
Attach the sterile filter at the dispenser of the device by turning the sterile filter
clockwise in the dedicated headset.
4.10
Electrical connection
-
Plug the power adapter into an electrical outlet (
100 …
230 volts, 50/60 Hz).
all electrical wiring must be installed in the way that damaging by work carried
out in the environment of the system is impossible
4.11
Initial start-up
-
Check the correct installation of the
Aquinity² E
or
Aquinity² P
(see chapter 4.3, 4.4,
4.5, 4.6, 4.7, 4.8, 4.9)
-
Connect the device to the power supply (see chapter 4.10)
-
Follow the instructions below
This is the first display after connecting to the mains. The
system jumps to the start screen
-
Please select “
First Start
”
deareation screw
sterile filter
