MP Systems V Series, Installation Operation & Maintenance

Page: 10 / 47

4
2.1. General Rules
MP System’s products have been designed and constructed in such a way to minimize any
possible cause of danger to the operator and their surroundings. However, residual risk still
remains and can arise through improper use of the machine and can be of various types;
▪
Risk due to escaped coolant/cutting fluid.
▪
Risk due to excessive noise caused by operating outside permitted limits.
▪
Risk of accidents caused by scraping against edged sheet metal profiles.
2.2. Prevention of Mechanical Risks
In operation,
MP System’s products contain some moving parts. These parts constitute a
possible source of danger to the operator, therefore in order to avoid any possible danger it is
necessary to observe the following operational rules;
▪
Before removing any panels/guards, ensure electricity supply to the machine has been
switched off.
▪
Never start the unit with any panel/guards removed.
▪
The additives present in coolant/cutting fluid may have a corrosive action that can
irritate the skin and eyes.
o
Always wear gloves & eye protection when handling coolant/cutting fluid.