LITESPEED RX
OWNERS MANUAL
Version 2
21
7.
Fit rear keel protector piece over bailey block assembly.
Picture 19
Fitting the keel protector piece.
8.
Fold and roll the sail parallel with the trailing edge.
Picture 20
Rolling the sail.
9.
Attach ties loosely around glider, going from wing tip to nose, and then tighten the
ties, moving from nose to wing tip, adjusting the sail so that the leading edge Mylar
inserts overlap smoothly with no kinks, as shown.
Picture 21
Attach ties.
10.
Put the glider bag over the glider, and then lay the glider over on its side.
