LITESPEED RX
OWNERS MANUAL
22
Version 2
11.
Disassemble control frame. Fold base tube out and lay the entire control frame
assembly back onto the keel. Open the ties and re-secure them over the control
frame, enclosing the frame inside Mylar. Fit padding to the bottom of control frame.
Tuck wires and bars neatly inside the sail. Pull the hang loop from in front of the
uprights so as not to jam the hang loop between the keel and the sail.
Picture 22
Fit Base Bar Padding.
12.
Place battens between leading edges with the camber to the tail end, then firm up
all ties and smooth out the rolled sail before closing the zip.
Picture 23
Pack Battens
between leading edges.
Special care must be taken with cables. The Litespeed RX features 1x19
cable for increased strength and low drag, but this cable is very easily kinked
unless special care is taken.
IMPORTANT
!
