LITESPEED RX
OWNERS MANUAL
Version 2
13
After initial assembly it is suggested that the nose batten be left in but pulled
out slightly and left beside the nose plate for pack-up. Check that the nose
batten sits over the lug on the keel securely.
NOTE
!
4.
Insert the ring of the lower front wires in the Bailey Block making sure that the spring
is firmly locked and the wires untwisted.
Picture 8
Attaching the front wires to the Bailey Block.
5.
Insert the nose batten. The batten may need some “feeding” through the Sail by
pulling the sail forward to remove any wrinkles as the batten slides into its pocket.
Picture 9
Insert nose batten.
6.
Carefully spread each wing making sure that you do not raise them above the keel.
Picture 10
Spread the wings.
Check bottom wires are not twisted or kinked.
NOTE
!