LITESPEED RX
OWNERS MANUAL
20
Version 2
Folding the Sail Tips - METHOD 2
•
Begin to roll the sail tip around the leading edge.
•
Continue to roll the sail until tightly rolled around leading edge.
•
Fit the sail and the outer dive strut into the boot.
4.
Fold the dingle dangle parallel to the keel and attach dingle dangle protector piece.
Picture 18
Turn the Dingle
Dangle parallel
to the keel and
fit the protector.
5.
De-tension the crossbar. De-tensioning the crossbar after folding the sail tips and
fitting the boots helps keep the sail tips clean by keeping them off the ground.
6.
When folding wings, go to the rear of the keel and grab the trailing edge at number
3 batten on either side and lift in and up so that the centre section can slide up the
keel without binding. Ensure that leading edges and keel remain in the same plane
and that no sail has caught between wing and keel.
Make sure that the Dingle-dangle is rotated in-line with the keel for pack-up to
prevent serious damage to the sail and spars.
IMPORTANT
!
