VPort D361
Introduction
1-3
Flexible I/O control for switching the video source, or connecting the external I/O devices
Two opto-isolated sensor inputs (DI) and 2 relay outputs (Relay or DO) are provided to control external devices,
giving system integrators the option of turning an analog system into an advanced security system. In addition,
the 2 DIs also can be used for selecting the video source. DI1 can function as a UP selection (for example, from
video source 1 to 2), and DI2 can function as a DOWN selection (for example, from video source 2 to 1).
Support for SNMP V1, V2c, and V3 for easy network management
More and more IP devices are networked for use on one TCP/IP network. To make management and
maintenance easier, SNMP (Simple Network Management Protocol) can be used to monitor all of these IP
devices.
CGI command support for 3rd -party developers
The VPort D361 also supports CGI commands for 3
rd
party developers who would like to integrate the control
of a video decoder into their system. The CGI commands can be downloaded from Moxa’s website free of
charge.
Package Checklist
Moxa’s VPort D361 is shipped with the items listed below. If any of these items is missing or damaged, please
contact your customer service representative for assistance.
•
1 × VPort D361
•
1 × 4-pin terminal block for 2 DIs
•
1 × 8-pin terminal block for a power input and 2 relay outputs
•
1 × 5-pin terminal block for the RS-232/422/485 PTZ control port
•
Quick Installation Guide
•
Document & Software CD (includes User’s Manual, Quick Installation Guide, and VPort Utility)
•
Warranty statement
NOTE: Notify your sales representative if any of the above items are missing or damaged.
Product Features
High performance video/audio networking solution
•
channel video output for analog NTSC/ PAL video signals
•
1 audio input and 1 audio output for 2-way voice communication
•
1 auto-sensing 10/100BaseT(X) Ethernet port
•
TCP, UDP, HTTP, and multicast network transmission modes
•
1 RS-232/422/485 PTZ port with serial-to-Ethernet Real COM mode for remote PTZ control with existing
legacy PTZ control devices (PTZ control driver NOT required)
•
Capability to decode different video stream resolutions from video encoder with a maximum of 540 TVL
lines
•
Maximum of 64 video sources can be set up as the decode video source
•
Supports for manually selecting the video sources, or automatically scanning for video sources
•
Supports 2 digital inputs to switch the video sources
•
Supports SNMP (V1/V2C/V3) for network system integration and management
•
Built-in web server and RS-232 console for remote access and configuration
•
Supports OSD (On-Screen Display)
•
Supports UPnP and IP filtering
