VPort D361
System Configuration
4-10
Setting
Description
Default
Enable UPnP
Enable or disable the UPnP function.
Enable
Accessible IP List
The VPort D361 uses an IP address-based filtering method to control access to the VPort.
Accessible IP Settings allows you to add or remove “Legal” remote host IP addresses to prevent unauthorized
access. Access to the VPort is controlled by IP address. That is, if a host’s IP address is in the accessible IP table,
then the host will be allowed access to the VPort. The Administrator can allow one of the following cases by
setting this parameter:
•
Only one host with a specific IP address can access the VPort.
Enter “IP address/255.255.255.255” (e.g., 192.168.1.1/255.255.255.255)
•
Hosts on a specific subnet can access the VPort.
Enter “IP address/255.255.255.0” (e.g., “192.168.1.0/255.255.255.0”)
•
Any host can access the VPort.
Disable this function.
