VPort D361
System Configuration
4-7
Reset to Factory Default
Reset to the factory default by clicking on the OK button (as shown in the following figure).
NOTE
All parameters will be reset to factory defaults when you use the Factory Default function. For this reason, if you
want to keep a digital copy of the current configuration, remember to export the sys_config.ini file before using
the Factory Default function.
Reboot
From the “Device Reboot” page, click OK (as shown in the following figure) to restart the VPort’s operating
system.
Network
General Network Settings
The General Network Settings page includes some basic but important network configurations that enable
the VPort to be connected to a TCP/IP network.
