Moxa Managed Ethernet Switch (UI_2.0_FW_5.x) User Manual
30
Password Setting
Setting
Description
Factory Default
Password
The email account password.
None
Email Address
Setting
Description
Factory Default
Max. of 30 characters
You can set up to 4 email addresses to receive alarm emails
from the Moxa switch.
None
Sender Address
Setting
Description
Factory Default
Max. 30 characters
Sender Email Address
admin@localhost
User TLS
Setting
Description
Factory Default
Yes/No
Enables TLS(Transport Layer Security)
No
SMTP Server Auth Method
Setting
Description
Factory Default
Plain/Login/ CRAM-MD5
choose an authentication mechanism, PLAIN, LOGIN, and
CRAM-MD5, to login SMTP Server
Plain
Sending a Test Email
After you complete the email settings, you should first click
Apply
to activate those settings, and then press
the
Test
button to verify that the settings are correct.
NOTE
Auto warning e-mail messages will be sent through an authentication protected SMTP server that supports
the CRAM-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication and Security Layer)
authentication mechanism.
We strongly recommend not entering your Account Name and Account Password if auto warning e-mail
messages can be delivered without using an authentication mechanism.
Syslog Server Settings
The Syslog function provides the event logs for the syslog server. The function supports 3 configurable
syslog servers and syslog server UDP port numbers. When an event occurs, the event will be sent as a
syslog UDP packet to the specified syslog servers. Each Syslog server can be activated separately by
checking the appropriate checkbox to enable it.
