Moxa Technologies EDR-G9010 Series, User Manual

Page: 129 / 274

EDR-G9010 Series User Manual 129
Hello Interval
Setting Description Factory Default
1 to 65535 seconds
Specify the Hello message interval. Hello packets are packets
that an OSPF process sends to its OSPF neighbors to maintain
connectivity with those neighbors. The hello packets are sent
at a configurable interval (in seconds). The value of all hello
intervals must be the same within a network.
10
Dead Interval
Setting Description Factory Default
1 to 65535 seconds
Specify the Dead interval. The dead interval is a configurable
interval (in seconds), and defaults to four times the value of
the hello interval.
40
Auth Type
Setting Description Factory Default
None,
Simple,
MD5
Select an authentication method. OSPF authentication
provides the flexibility of authenticating OSPF neighbors.
Users can enable authentication to exchange routing update
information in a secure manner. OSPF authentication can
either be none, simple, or MD5. Authentication does not need
to be configured. If it is configured, all Industrial Secure
Routers on the same segment must have the same password
and authentication method.
None
Auth Key
Setting Description Factory Default
0 to 8
Specify the authentication key.
If the Auth Type is Simple the auth key is a pure-text
password.
If the Auth Type is MD5 the auth key is encrypted password.
None
MD5 Key ID
Setting Description Factory Default
1 to 255
MD5 authentication provides higher security than plain text
authentication. This method uses the MD5 to calculate a hash
value from the contents of the OSPF packet and the
authentication key. This hash value is transmitted in the
packet, along with a key ID.
None
Metric
Setting Description Factory Default
1 to 65535 Manually set Metric value /Cost of OSPF. 1
When finished, click CREATE to save your configuration.
Modify an Existing Interface
Click the icon next to the entry you want to modify. When finished, click APPLY to save your changes.
Delete an Existing Interface
Select the item(s) in the Interface List, click the icon and click DELETE to delete the item(s).