Moxa Technologies EDR-G9010 Series, User Manual, Page: 233 / 274

EDR-G9010 Series User Manual 233
Trusted Access
The EDR-G9010 Series uses an IP address-based filtering method to control access to the device.
Trusted IP List
Setting Description Factory Default
Enabled or Disabled
Enable or disable the Trusted IP list. If enabled, only IP
addresses in the Trusted IP table can access the device. Refer
Create a Trusted Access Entry for more information.
If this option is disabled, any IP address can access the
device.
Enabled
Accept All LAN Port Connections
Setting Description Factory Default
Enabled or Disabled
Enable or disable the device to accept all connections on the
LAN interface.
Enabled
Log
Setting Description Factory Default
Enabled or Disabled Enable or disable Trusted Access event logs. Disabled
Severity
Setting Description Factory Default
<0> Emergency
<1> Alert
<2> Critical
<3> Error
<4> Warning
<5> Notice
<6> Informational
<7> Debug
Select the severity of the Trusted Access event. <0> Emergency
Log Destination
Setting Description Factory Default
Local Storage, Syslog,
Trap If Log is enabled, select the Trusted Access event log storage
location.
None