Moxa Technologies EDR-G9010 Series, User Manual

Page: 98 / 274

EDR-G9010 Series User Manual 98
Adding Ports/VLANs to the Bridge Interface
Port Base
Port-based bridge ports allow the router firewall to filter traffic moving between the assigned bridge ports.
Select Port-Base as the Bridge type to create a port-based bridge.
Name
Setting Description Factory Default
Max. 12 characters Enter a name for the bridge interface. None
Status
Setting Description Factory Default
Enabled or Disabled Enable or disable the bridge interface. Disabled
Goose Message Pass-Through
Setting Description Factory Default
Enabled or Disabled Enable or disable GOOSE message passthrough. Disabled
IP Address
Setting Description Factory Default
IP Address Enter the IP address of the interface. None
Subnet Mask
Setting Description Factory Default
Subnet Mask Enter the subnet mask of the interface. None
Bridge Member
Setting Description Factory Default
Port Select the port that will act as the bridge port. None
When finished, click APPLY to save your changes.