Moxa Technologies EDR-G9010 Series, User Manual

Page: 108 / 274

EDR-G9010 Series User Manual 108
Ring Coupling Settings
Status
Setting Description Factory Default
Enabled or Disabled Enable or disable this device as a Ring Coupler. Disabled
Coupling Mode
Setting Description Factory Default
Dual Homing Set the Coupling mode to Dual Homing.
Dual Homing Backup Path Set the Coupling mode to Backup Path.
Primary Path Set the Coupling mode to Primary.
If the Coupling Mode is set to Dual Homing, configure the following settings:
Primary Port
Setting Description Factory Default
Select the port from the
list
Select the port that will act as the backup port. 1/3
Backup Port
Setting Description Factory Default
Select the port from the
list
Select the port that will act as the backup port. None
If the Coupling Mode is set to Backup Path or Primary, configure the following settings:
Coupling Port
Setting Description Factory Default
Select the port from the
list
Select the port that will act as the coupling port. 1/3
When finished, click APPLY to save your changes.