EDR-G9010 Series User Manual
105
Priority
Setting
Description
Factory Default
0 to 240, multiples of
16
Specify the port priority. A lower number indicates a higher
priority.
128
Path Cost
Setting
Description
Factory Default
0 to 200000000
Specify the path cost. A higher cost indicates that this port is
less suitable as a node for the Spanning Tree topology.
If set to 0, the path cost will be automatically calculated based
on different port speeds.
20000
When finished, click
APPLY
to save your changes.
Status
The Status page shows the Spanning Tree root and port information.
At the top of the page, the user can check the
Root Information
of this function. You will see:
Root State
This shows if this switch is the Root of the Spanning Tree (the root is determined automatically).
At the bottom of the page, the user can check the
Status
of this function.