EDR-G9010 Series User Manual
97
PPPoE Dialup
Username
Setting
Description
Factory Default
Max. 30 characters
Enter the username used for logging in to the PPPoE server.
None
Password
Setting
Description
Factory Default
Max. 30 characters
Enter the password used for logging in to the PPPoE server.
None
Host Name
Setting
Description
Factory Default
Max. 30 characters
Enter the user-defined hostname of the PPPoE server.
None
Virtual MAC
Virtual MAC
Setting
Description
Factory Default
Virtual MAC Address
Specify the virtual MAC address.
00.00.00.00.00.00
DNS Settings
When using Dynamic IP or PPPoE as the Connection Type, you can also configure optional DNS servers.
Primary DNS Server
Setting
Description
Factory Default
IP Address
Enter the primary DNS IP address.
0.0.0.0
Secondary DNS Server
Setting
Description
Factory Default
IP Address
Enter the secondary DNS IP address.
0.0.0.0
Tertiary DNS Server
Setting
Description
Factory Default
IP Address
Enter the tertiary DNS IP address.
0.0.0.0
When finished, click
APPLY
to save your changes.
NOTE
Manually configured DNS servers will have a higher priority than DNS servers from the PPPoE or DHCP
server.
Bridge Group Interface
When ports are set in the VLAN, the packets transmitted within these ports will be forwarded by the
switching chip without being filtered by the firewall. However, in some scenarios, it is required to filter
specific packets transmitted within the VLAN. By selecting ports as Bridge port, the packets transmitted
between these ports will be checked by the firewall.
Similarly, when ports are associated with different VLANs, the packets transmitted within these VLANs will
be routed by the switching chip locally, without being inspected by the firewall. However, in some scenarios,
it is required to filter specific packets transmitted between VLANs. By adding VLANs to a Bridge Zone, the
packets transmitted between these two zones will be checked by the firewall.
