AirWorks AWK-3131A
Web Console Configuration
3-66
Change Password
Use the Change Password function to change the password of existing user accounts. First input the
current password, and then type the new password in the New password and Confirm password input
boxes.
NOTE
To maintain a higher level of network security, do not use the default password (moxa), and be sure to
change all user account passwords regularly.
NOTE
If the Password-strength test option is enabled, you will be prompted to use passwords that adhere to
the following password policy:
•
The password must contain at least one digit: 0, 1, 2, …, 9.
•
The password must contain both upper and lower case letters:
A, B, …, Z, a, b, …, z.
•
The password must contain at least one of the following special characters:
~!@#$%^-_:,.<>[]{}
•
The password cannot contain the following special characters:
` ' " | ; &
•
The password must have more characters than the minimum password length (default = 4).
•
Starting with the firmware version 1.4, the default password is moxa. For all previous firmware versions
(up to 1.3), the default password is root.
Misc. Settings
Additional settings to help you manage your AWK-3131A are available on this page.
Reset button
Setting
Description
Factory Default
Always Enable
The AWK-3131A’s Reset button works normally.
Always enable
Disable the Factory
Reset Function after 60
Seconds
The AWK-3131A’s reset to default function will be inactive 60
seconds after the AWK-3131A finishes booting up.
