AWK-3131A-M12-RCC
Other Console Considerations
5-4
The AWK-3131A-M12-RCC’s device information and Main Menu options are displayed
5.
Key in the number corresponding to the menu option that you would like to select.
NOTE
To modify the appearance of the PComm Terminal Emulator window, select Edit
Font and then choose the
desired formatting options.
NOTE
The AWK's serial console needs to detect a DSR signal to activate the console output. Be sure to use a full
8-wire serial cable instead of a 3-wire (Tx/Rx/GND only). For a good connection to the AWK device we
recommend using Moxa serial console cable - CBL-RJ45F9-150.
Configuring Through Telnet and SSH Consoles
You may use Telnet or SSH client to access the AWK-3131A-M12-RCC and manage the console over a network.
To access the AWK-3131A-M12-RCC’s functions over the network from a PC host that is connected to the same
LAN as the AWK-3131A-M12-RCC, you need to make sure that the PC host and the AWK-3131A-M12-RCC are
on the same logical subnet. To do this, check your PC host’s IP address and subnet mask.
ATTENTION
If you unplug the RS-232 cable or disable the DTR signal, a disconnection event will be evoked to enforce
logout for network security. You will need to log in again to resume operation.
