5
APPLYING THE BRAKE
Apply upward pressure with your foot to the brake lever, situated at the rear of the buggy and
located between the rear wheels. The brake will apply firm pressure to the rear wheels and
secure immediate immobility of the buggy.
DISENGAGING THE BRAKE
Apply downward pressure with your foot to disengage the brake lever, so that the brake
returns to the disengaged position, away from the mobile action of the wheels.
BRAKE WARNING
:
DO NOT ALLOW CHILDREN TO PLAY NEAR THE BUGGY BRAKE
PUT ON THE BRAKE WHENEVER YOU PARK THE STROLLER/PRAM
ENSURE THE BRAKE IS ON WHEN LOADING AND UNLOADING CHILDREN
When applying your brake keep children well clear of the buggy because injury could
occur. DO NOT use stroller if brakes are not functioning. Always wear appropriate
footwear when applying or disengaging the brake.
USEFUL INFORMATION
ADJUSTING THE HANDLE HEIGHT
The telescoping handle can be adjusted to various heights with the assistance of two
securing bolts situated under the top of the buggy frame;
1) Apply the brakes.
2) Slide the handle to your desired height and tighten both tri-knobs.
3) Do not over-tighten the securing bolts.
BABY SEAT ANGLE
The Everest seat back can be reclined to any point between upright and fully reclined
position.
1) To adjust and recline the sling simply pull on the buckles at the rear of the baby sling, to
permit the webbing straps to slide through and recline the seat.
2) To adjust and incline the sling apply even force, pull on both the webbing straps, and the
seat will incline into the upright/toddler sitting position.
