8
CARE AND MAINTENANCE OF STROLLER
BUGGY CARE AND MAINTENANCE OF FRAME
There are three steps to cleaning your powder coated buggy and chrome frame parts.
1) Remove loose deposits with a wet sponge rather than risk micro scratching the surface by
dry dusting.
2) Using a soft brush and a mild detergent in warm water, clean the powder coating and
chrome to remove any dust, salt water and residue or other deposits.
3) Always rinse thoroughly with fresh water to remove any remaining detergents.
WARNING:
The use of harsh solvents may damage the powder coating on the frame.
Methylated spirits is exclusively recommended for removing stubborn stains on the
buggy frame only.
ROUTINE BUGGY INSPECTION AND MAINTENANCE
The chrome working parts of the stroller, including: axles, nuts and bolts can become stiff and
squeaky over time. This usually occurs from the accumulation of air-borne salt deposits,
atmospheric pollution, general dirt, grime and ultra violet light.
Follow the instructions shown above for “three step” cleaning.
After cleaning the chrome parts, spray a light coating of CRC/Silicone spray or equivalent
onto the affected area.
WARNING: Cover and protect buggy fabric while performing frame maintenance.
FABRIC CARE
1) To keep the fabric looking fresh and new it should be washed occasionally before
substances such as dirt and grime are allowed to accumulate and become embedded in the
fabric.
2) Spills should be mopped up immediately as they occur.
3) Brush off any loose dirt then clean with a mild solution of natural liquid soap or sunlight
soap in tepid water.
4) Rinse thoroughly to remove soap.
WARNING: Do not use detergents. Do not Machine wash
.
Allow to air dry naturally –
DO NOT place in a dryer.
