6
DETACHING THE BABY SLING/SEATS
The Everest baby seat/sling is provided fully installed. It is not recommended that you remove
the baby sling/seat from the Buggy frame. Please refer to fabric care and maintenance.
For vital replacement of fabric;
1) Unfasten all domes securing fabric to buggy frame.
2) Remove 4 screws securing webbing straps at rear of baby seat/sling to Buggy frame.
3) Only replace with parts supplied and approved by the manufacturer/distributor.
SUNHOOD AND SAFETY BAR
The sunhood is secured into position by screwing the large tri-knobs into either side of the
buggy.
This prevents the sunhood from involuntarily folding back when in use.
NOTE:
Do not over tighten.
Loosen tri-knobs when folding your sunhood and/or the Safety bar back against the top of the
buggy frame.
REMOVING SUNHOOD AND SAFETY BAR
Unscrew the backing nuts on the inside of the buggy frame, opposing the entry point of the
large Tri-knobs. Unscrew the bolts, and remove.
The Sunhood and safety bar can be lifted away and removed.
WARNING: We do not recommend that these items are removed for the safe function
of the buggy.
