Ix350_02b_oi_e.doc / Mai-18
Page 23 / 50
Continuation „SSI Properties“:
ERROR BIT
Defines the encoder monitoring and the error bit
0
No error bit available.
Review on connected sensor is turned off.
…
32
Position of the error bits to be evaluated
Review on connected sensor is turned on.
ERROR POLARITY
Defined the polarity of the error bit in the case of an error
0
Bit is low in the case of an error
1
Bit is high in the case of an error
ENCODER SUPPLY (available only at IX355)
This parameter defines the output voltage of the auxiliary output (aux out)
0
24VDC SUPPLY
24 VDC encoder supply
1
5VDC SUPPLY
5
VDC encoder supply
