SD34002g_e.doc / Sep-13
Page 49 / 60
From this follows that, if you use a counter model with two sets of thumbwheels only
(thumbwheel set 1 and thumbwheel set 2), you would only have preselections referring to
encoder1, but no thumbwheel access to the sum.
To avoid such kind of limitations, parameter F06.072 allows free assignments between any of
the thumbwheel switch sets (switch1 to switch4, see previous figure) and any of the four
outputs (K1 to K4)
Setting of parameter F06.072
00 01 02 03 04 05 06 07 08 09 10 11
Thumbwheel set 1 is linked to output K1 K1 K1 K1 K1 K1 K2 K2 K2 K2 K2 K2
Thumbwheel set 2 is linked to output K2 K2 K3 K3 K4 K4 K1 K1 K3 K3 K4 K4
Thumbwheel set 3 is linked to output K3 K4 K4 K2 K2 K3 K3 K4 K4 K1 K1 K3
Thumbwheel set 4 is linked to output K4 K3 K2 K4 K3 K2 K4 K3 K1 K4 K3 K1
Setting of parameter F06.072
12 13 14 15 16 17 18 19 20 21 22 23
Thumbwheel set 1 is linked to output K3 K3 K3 K3 K3 K3 K4 K4 K4 K4 K4 K4
Thumbwheel set 2 is linked to output K1 K1 K2 K2 K4 K4 K1 K1 K2 K2 K3 K3
Thumbwheel set 3 is linked to output K2 K4 K4 K1 K1 K2 K2 K3 K3 K1 K1 K2
Thumbwheel set 4 is linked to output K4 K2 K1 K4 K2 K1 K3 K2 K1 K3 K2 K1
