manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

Share
Download
Motorola WiNG 5.7.1 System Reference Manual Download Page 876

13 - 60  WiNG 5.7.1 Access Point System Reference Guide 

The 

System Resources 

field displays the following:

The 

Fan Speed 

field displays the following:

The 

Temperature 

field displays the following:

The 

Kernel Buffers 

field displays the following:

Fallback Enabled

Displays whether this option is enabled. This method enables a user to store a known legacy 
version and a new version in device memory. The user can test the new software, and use an 
automatic fallback, which loads the old version on the access point if the new version fails.

Fallback Image 
Triggered

Displays whether the fallback image was triggered. The fallback image is an old version of a 
known and operational software stored in device memory. This allows a user to test a new 
version of software. If the new version fails, the user can use the old version of the software.

Next Boot

Designates this version as the version used the next time the access point is booted.

Available Memory 
(MB)

Displays the available memory (in MB) available on the access point.

Total Memory (MB)

Displays the access point’s total memory. 

Currently Free RAM

Displays the access point’s free RAM space. If it is very low, free up some space by closing 
some processes.

Recommended Free 
RAM

Displays the recommended RAM required for routine operation.

Current File 
Descriptors

Displays the access point’s current file descriptors. 

Maximum File 
Descriptors

Displays the access point’s maximum file descriptors.

CPU Load 1 Minute

Lists this access point’s CPU utilization over a 1 minute span.

CPU Load 5 Minutes

Lists this access point’s CPU utilization over a 5 minute span.

CPU Load 15 Minutes

Lists this access point’s CPU utilization over a 15 minute span.

Number

Displays the number of fans supported on the this access point.

Speed (Hz)

Displays the fan speed in Hz. 

Number

Displays the number of temperature elements used by the access point.

Temperature

Displays the current temperature (in Celsius) to assess a potential access point overheat 
condition.

Buffer Size

Lists the sequential buffer size.

Current Buffers

Displays the current buffers available to the selected access point.

Maximum Buffers

Lists the maximum buffers available to the selected access point.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands