Motorola WiNG 5.7.1, System Reference Manual

Page: 367 / 1090

5 - 283
5. Select Quality of Service .
Figure 5-183 Device Overrides - Network QoS screen
6. Set or override the following parameters for the IP DSCP mappings for untagged frames:
Use the spinner controls within the 802.1p Priority field for each DSCP row to change or override the priority value.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen’s
Device Overrides field and select Clear Overrides . This will remove all overrides
from the device.
DSCP Lists the DSCP value as a 6-bit parameter in the header of every IP packet used for packet
classification.
802.1p Priority Assign a 802.1p priority as a 3-bit IP precedence value in the Type of Service field of the
IP header used to set the priority. The valid values for this field are 0-7. Up to 64 entries
are permitted. The priority values are:
• 0 – Best Effort
• 1 – Background
• 2 – Spare
• 3 – Excellent Effort
• 4 – Controlled Load
• 5 – Video
• 6 – Voice
• 7 – Network Control