Motorola WiNG 5.7.1, System Reference Manual

Page: 344 / 1090

5 - 260 WiNG 5.7.1 Access Point System Reference Guide
Figure 5-169 Device Overrides - Access Point Radio Advanced Settings tab
21. Refer to the Aggregate MAC Protocol Data Unit (A-MPDU) field to define or override how MAC service frames are
aggregated by the access point radio.
22. Use the Aggregate MAC Service Data Unit (A-MSDU) drop-down menu to set or override the supported A-MSDU mode.
23. Available modes include Receive Only and Transmit and Receive . Using Transmit and Receive, frames up to 4 KB can be
sent and received. The buffer limit is not configurable.
24. Use the Airtime Fairness fields to configure wireless access to devices based on their usage.
A-MPDU Modes Use the drop-down menu to define the A-MPDU mode. Options include Transmit Only,
Receive Only, Transmit and Receive and None . The default value is Transmit and Receive.
Using the default value, long frames can be both sent and received (up to 64 KB). When
enabled, define either a transmit or receive limit (or both).
Minimum Gap Between
Frames Use the drop-down menu to define the minimum gap between A-MPDU frames (in
microseconds). The default value is
auto which indicates that the minimum gap between
frames is selected automatically. The other values are 0, 1, 2, 4, 8 and 16 .
Received Frame Size
Limit If a support mode is enable allowing A-MPDU frames to be received, define an advertised
maximum limit for received A-MPDU aggregated frames. Options include 8191, 16383,
32767 or 65535 bytes. The default value is 65535 bytes.
Transmit Frame Size
Limit Use the spinner control to set limit on transmitted A-MPDU aggregated frames. The
available range is from 0 - 65,535 bytes). The default value is 65535 bytes.