manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

Share
Download
Motorola WiNG 5.7.1 System Reference Manual Download Page 676

9 - 8

WiNG 5.7.1 Access Point System Reference Guide 

Figure 9-4

Captive Portal Policy screen - Web Page tab

The 

Login

 screen prompts for a username and password to access the captive portal and proceed to either the Terms and 

Conditions page (if used) or the Welcome page. The 

Terms and Conditions 

page provides conditions that must be agreed to 

before wireless client guest access is provided for the captive portal policy. The 

Welcome

 page asserts a user has logged 

in successfully and can access the captive portal. The 

Fail

 page asserts the authentication attempt has failed, and the user 

is not allowed access (using this captive portal policy) and must provide the correct login information again to access the 
Internet. The 

No Service

 page asserts that the captive portal service is temporarily unavailable due to technical reasons. 

Once the services become available, the captive portal user is automatically re-connected to the portal.

17. Select the location where the captive portal 

Login

, 

Terms and Conditions

, 

Welcome

, 

Fail

 and 

No Service

 web pages are 

hosted. Available sources include 

Internal

, 

Advanced 

or 

Externally Hosted

. If 

Internal

 is selected, provide the information 

for each of the screens below. If 

Advanced

 is selected, follow the on-screen instructions to upload custom web pages. If 

Externally Hosted

 is selected, provide the URLs for each of the necessary pages in the fields below.

18. Provide the following required information when creating 

Login, Terms and Conditions, Welcome

,

 Fail 

and

 No 

Service

 pages maintained internally:

Organization’s Name

If the captive portal is defined on behalf of an organization, that name can be associated 
as sponsoring the captive portal. Text entered in this field is common to all pages.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands