manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

Share
Download
Motorola WiNG 5.7.1 System Reference Manual Download Page 131

5 - 47

19. Refer to the 

Spanning Tree Port Cost

 table.

Define an Instance Index using the spinner control and then set the cost. The default path cost depends on the user defined 
port speed. The cost helps determine the role of the port channel in the MSTP network. The designated cost is the cost for 
a packet to travel from this port to the root in the MSTP configuration. The slower the media, the higher the cost.

20. Select

 + Add Row

 as needed to include additional indexes.

21. Refer to the 

Spanning Tree Port Priority

 table.

Define an 

Instance Index

 using the spinner control and then set the 

Priority

. The lower the priority, a greater likelihood 

of the port becoming a designated port.

22. Select 

+ Add Row 

needed to include additional indexes.

23. Select 

OK

 to save the changes made to the Ethernet Port Spanning Tree configuration. Select 

Reset

 to revert to the last 

saved configuration.

Cisco MSTP 
Interoperability

Select either the 

Enable

 or 

Disable

 radio buttons. This enables interoperability with 

Cisco’s version of MSTP, which is incompatible with standard MSTP. This setting is 
disabled by default.

Force Protocol Version

Sets the protocol version to either 

STP(0)

, 

Not Supported(1)

, 

RSTP(2)

 or 

MSTP(3)

. MSTP is 

the default setting.

Guard

Determines whether the port channel enforces root bridge placement. Setting the guard 
to 

Root

 ensures the port is a designated port. Typically, each guard root port is a 

designated port, unless two or more ports (within the root bridge) are connected together. 
If the bridge receives superior 

Bridge Protocol Data Units 

(BPDUs) on a guard root-enabled 

port, the guard root moves the port to a root-inconsistent STP state. This state is 
equivalent to a listening state. No data is forwarded across the port. Thus, the guard root 
enforces the root bridge position.

Speed

Default Path Cost

<=100000 bits/sec

200000000

<=1000000 bits/sec

20000000

<=10000000 bits/sec

2000000

<=100000000 bits/sec

200000

<=1000000000 bits/sec

20000

<=10000000000 bits/sec

2000

<=100000000000 bits/sec

200

<=1000000000000 bits/sec

20

>1000000000000 bits/sec

2

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands