6881038B70
July 27, 2001
27
Level III Service Manual Disassembly
Removing and Replacing the Vibrator
1.
Remove the battery cover, battery, front cover, and transceiver board assembly
as described in the procedures
.
2.
Using the flat end of the disassembly tool, carefully pry the vibrator from its
cavity in the rear housing. The vibrator should come away easily from the rear
housing. See Figure 15.
3.
To replace, insert the vibrator into the rear housing. Ensure the vibrator
terminals are properly aligned to contact the corresponding pads on the
transceiver board.
4.
Replace the transceiver board assembly, front cover, battery, and battery cover
as described in the procedures.
010517o
Figure 15. Removing the vibrator
VIBRATOR
REAR HOUSING
DISASSEMBLY TOOL
Summary of Contents for T193
