Motorola T193 Service Manual Download

Page: 26 / 57

July 27, 2001

6881038B70

Disassembly Product Family C21

After ensuring the transceiver board assembly is properly seated in the rear
housing, insert and tighten the 6 screws. Do not overtighten.

Replace the front cover, battery, and battery cover as described in the proce-
dures.

Removing and Replacing the Cover Plate

Remove the battery cover, battery, front cover, and transceiver board assembly
as described in the procedures

Using the flat end of the disassembly tool, carefully disengage the 2 cover plate
catches from the transceiver board.

Carefully lift the cover plate from the transceiver board assembly as shown in
Figure 10.

To replace, align the cover plate with the transceiver board assembly and press
together until the catches snap into place. Ensure the cover plate is properly
aligned and flat against the transceiver board assembly.

Replace the transceiver board assembly, front cover, battery, and battery cover
as described in the procedures.

This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.

The cover plate is reusable. Do not bend the catches permanently.

010512o

Figure 10. Removing the cover plate

TRANSCEIVER

BOARD ASSEMBLY

COVER PLATE

CATCH, 2 PLACES

DISASSEMBLY TOOL

Summary of Contents for T193


























































Search results

Summary of Contents for T193

Reviews:

Related manuals for T193

Brands by name

Popular brands

Motorola T193, Service Manual

Search results

Summary of Contents for T193

Reviews:

Related manuals for T193

Brands by name

Popular brands