6881038B70
July 27, 2001
17
Level III Service Manual Disassembly
3.
Remove the battery by lifting its bottom end from the battery compartment
and sliding it down and away from the compartment as shown in Figure 5.
4.
To replace, align the battery with the battery compartment so the terminals
on the battery match the battery contacts in the phone.
5.
Slide the top of the battery into the receptacle molded into the housing, then
press the bottom end of the battery securely into the battery compartment.
6.
Line up the battery cover with the rear housing then slide it forward until it
snaps into place.
010506o
Figure 5. Removing the battery
E
There is a danger of explosion if the Nickel Metal Hydride battery is replaced
incorrectly. Replace only with the same type of battery or equivalent as recommended
by the battery manufacturer. Dispose of used batteries according to the manufac-
turer’s instructions.
BATTERY
REAR HOUSING
Summary of Contents for T193
