manualshive.com logo in svg

Motorola T193, Service Manual

Share
Download
Motorola T193 Service Manual Download Page 30

26

       July 27, 2001

6881038B70

Disassembly               Product Family  C21

Removing and Replacing the Microphone Grommet and Microphone

1.

Remove the battery cover, battery, front cover, transceiver board assembly, 
and cover plate as described in the procedures

.

2.

Using the flat end of the disassembly tool, carefully pry the microphone 
grommet from the microphone as shown in Figure 14. The grommet should 
come away easily. 

3.

Using the plastic tweezers to grasp the microphone, pull the microphone 
straight out of its socket. 

4.

To replace, insert the microphone leads into the socket on the transceiver board 
and carefully press straight down until fully seated. 

5.

Replace the cover plate, transceiver board assembly, front cover, battery, and 
battery cover as described in the procedures.

010516o

Figure 14. Removing the microphone grommet and microphone

G

The microphone leads are easily bent or broken. Use care to prevent damage when 
handling. The microphone is keyed to fit on the board only one way and will prevent 
proper board mounting if installed incorrectly.

TRANSCEIVER BOARD

MICROPHONE

GROMMET

MICROPHONE

DISASSEMBLY

TOOL

PLASTIC

TWEEZERS

Summary of Contents for T193


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands