Motorola RS507 Series, Product Reference Manual

Page: 37 / 263

SAC5070 8-Bay Battery Charger 2 - 5
Inserting the Imager Battery in the Charger
The Charger supports both standard and extended capacity batteries.
Figure 2-4
Inserting the Imager Battery into the Charger
Charge the Battery
To charge the battery(s):
1.
Insert the battery(s) into the 8-Bay Battery Charger so that the contacts of the battery are first to enter, facing
down, gently. Do not use excessive force.
2.
The 8-Bay Battery Charger starts to charge automatically. On each bay, the flashing amber Charge Status LED
(see
Figure 2-1 ) indicates the charge status.
A full charge of a depleted battery takes up to four hours. The Charge Status LED lights solid amber when the
battery is fully charged.
Standard Battery
Charger Bay
CAUTION
Only Lithium-ion batteries that have been designed for use with the RS507 Hands-free Imager can be
recharged by the Charger. Do not attempt to recharge other types of rechargeable batteries or any
type of batteries. Doing so could destroy those batteries and damage the Charger.
NOTE
Batteries should be charged within the 0°C (+32°F) and +40°C (+104°F) ambient temperature range.