manualshive.com logo in svg

Motorola RS507 Series, Product Reference Manual

Share
Download
Motorola RS507 Series Product Reference Manual Download Page 202

RS507 Bluetooth Connection Using HID and SPP Profiles 7 - 33

The RS507 is ready to scan and send bar codes over the assigned serial port. 

8.

Find the assigned serial Outgoing port, right click the BT icon and select 

Bluetooth Configuration 

and the

 

Local Services 

tab.

Figure 7-44    

Bluetooth Configuration Screen - SPP connection with RS507 as a Slave

9.

Open the COM port assigned as Incoming COM port in the application (for example, COM7). After the COM 
port is opened the computer connects to the RS507 and a beep will sound. For demonstration, refer to 

How to 

demonstrate SPP connection with a computer on page 7-34

. 

How to pair and connect with other devices

The RS507 can pair and connect as a serial port device using the Bluetooth SPP profile to other devices that 
support SPP using the device either the RS507 as a Master (recommended) or the device discovery feature.

The PC Tool application can be used to generate the Bluetooth Device (BD) address of the target device for 
testing. Otherwise this bar code can be printed on a label and affixed to the device.

NOTE

Do not confuse the BT serial port assigned as Incoming (RS507 initiates the connection) with the BT serial 
port assigned as Outgoing (The computer initiates the connection and RS507 is discovered - Slave Mode).

NOTE

If the COM port is not opened prior to the connection, the RS507 will fail to connect. Make sure 
the same COM port is closed in other applications.

NOTE

Not all devices support SPP. If the RS507 is not discovered as a serial port device (camera), 
check with the device vendor.

Summary of Contents for RS507 Series








































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands