Motorola RS507 Series Product Reference Manual Download

Page: 13 / 263

xiv

RS507 Hands-Free Imager Product Reference Guide

Chapter Descriptions

Topics covered in this guide are as follows:

•

Chapter 1, Getting Started

provides information on getting the Imager up and running for the first time, basic

instructions for using the Imager and instructions for resetting the Imager and capturing data.

•

Chapter 2, SAC5070 8-Bay Battery Charger

provides information on charging and testing the Imager battery.

•

Chapter 3, Troubleshooting & Maintenance

provides troubleshooting, cleaning, part replacement and

technical specifications for the Imager.

•

Chapter 4, RS507 Update and Configuration

provides instructions for firmware update and configuration of

the Imager operation.

•

Chapter 5, Miscellaneous Imager Options

provides information on programming the Imager to perform

various functions, or activating different features.

•

Chapter 6, Symbologies

details symbology features and provides programming bar codes for selecting these

features.

•

Chapter 7, RS507 Bluetooth Connection Using HID and SPP Profiles

describes the Bluetooth connection

modes of the RS507 to a personal computer and non-Motorola terminals.

•

Chapter 8, Specifications

provides Imager and charger technical specifications.

•

Appendix A, Standard Default Parameters

provides a sample of bar codes used for configuring the Imager.

•

Appendix B, Programming Reference

provides symbol code characters.

•

Appendix C, Sample Bar Codes

provides sample bar codes for Imager testing.

•

Appendix D, Numeric Bar Codes

provides a sample of numeric bar codes.

Notational Conventions

The following

conventions are used in this document:

•

“RS507” refers to the Motorola RS507 Hands-Free Imager.

•

“Imager” refers to the Motorola RS507 Hands-Free Imager.

•

“Terminal” refers to the Wearable Terminal WT4090 or any mobile computer connected to the Imager.

•

“Charger” refers to the SAC5070 8-Bay Battery Charger of the RS507.

•

Italics

are used to highlight the following:

•

Chapters and sections in this and related documents

•

Dialog box, window and screen names

•

Drop-down list and list box names

•

Check box and radio button names

•

Icons on a screen

•

Bold

text is used to highlight the following:

•

Key names on a keypad

•

Button names on a screen or window.

Summary of Contents for RS507 Series








































































































































































































































































Search results

Summary of Contents for RS507 Series

Reviews:

Related manuals for RS507 Series

Brands by name

Popular brands

Motorola RS507 Series, Product Reference Manual

Search results

Summary of Contents for RS507 Series

Reviews:

Related manuals for RS507 Series

Brands by name

Popular brands