Motorola MTP6650 Feature User Manual Download Page 137

Page: 137 / 174

•

– Activates location report backlog recording.

•

Off

– Deactivates location report backlog recording.

4.19.5.2

Viewing Backlog Reports

Procedure:

From the home screen, press the

Menu

key.

Select

Location

→

Backlog

→

Reports

The radio displays the number of backlog reports stored.

4.19.5.3

Deleting All Backlog Reports

Procedure:

From the home screen, press the

Menu

key.

Select

Location

→

Backlog

→

Delete All

4.20

Packet Data

NOTE:

This is a Software Selling Feature.

The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet
Protocol (IP).

NOTE:

To transfer data from a standard computer over the air, connect the computer using the data
cable PMKN4129 with your radio. Your service provider has to setup additional applications on
your computer.

If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot
Packet Data (MSPD) Service.

4.20.1

Viewing Data Statistics

Procedure:

From the home screen, press the

Menu

key.

Select

Packet Data

NOTE:

Data services are only available in TMO Mode. The data option must be set to

Voice Data

Data Only

Select one of the following options:

•

Sent Data

– The number of KBs sent and throughput since current Packet Data activation is

displayed.

•

Received Data

– The number of KBs received and throughput since current Packet Data

activation is displayed.

•

Bandwidth

– Active data session percentage is shown.

MN005826A01-AE

Chapter 4 : Main Menu

137

Summary of Contents for MTP6650














































































































































































Search results

Summary of Contents for MTP6650

Reviews:

Related manuals for MTP6650

Brands by name

Popular brands

Motorola MTP6650, Feature User Manual

Search results

Summary of Contents for MTP6650

Reviews:

Related manuals for MTP6650

Brands by name

Popular brands