background image

4.3.2.2

Receiving New Messages

Prerequisites: 

Your radio displays a New Message icon, an animation, and plays a 

New Mail

Received

 tone.

Procedure:

Select one of the following:

Read

 – opens the entire message.

Back

 – dismisses the message. You can access the message later from the 

Inbox

.

4.3.2.3

Using Submenus in the Inbox and the Outbox

Procedure:

1

From the home screen, press the 

Menu

 key.

2

Select 

Messages

 → 

Inbox

 or 

Outbox

.

3

Highlight the required message and press 

Menu

 key.

4

Do one of the following:

Store

 – Saves a message as a template. Change the default template name and press 

OK

.

Delete

 – Deletes the selected message. Press 

Yes

 to confirm.

Delete All

 – Deletes all the messages in the 

Inbox

 or 

Outbox

. Press 

Yes

 to confirm.

Reply

 (only for 

Inbox

) – Invokes the edit screen with the old message as default text and the

message originator as a recipient. After editing, press 

Send

, the 

PTT

 button, or the 

Send

 key

to send.

Resend

 (only for 

Outbox

) – Invokes the edit screen with previously entered text with the

same recipient. After editing, press 

Send

, the 

PTT

 button, or the 

Send

 key to send.

Forward

 – Invokes the edit screen with the old message to send it to a different participant.

After editing, press 

Send

, the 

PTT

 button, or 

Send

 key to send.

Refresh

 – Re-orders the message list and displays the new messages.

Delivery Status

 (only for 

Outbox

) – Shows the date and time of the message when it is

sent, delivered, read, and expired; was not delivered, expired was not read, or failed
unknown.

Protect

 – Protects the message from being deleted or overwritten.

Unprotect

 – Remove the protection of the message.

4.3.2.4

Embedded Number

This feature allows you to call a number from a message or to start a group call with the message
sender talkgroup.

4.3.2.5

Storing Numbers from Messages

Prerequisites: 

Embedded Number feature is enabled by your service provider.

68015000897–FC
Chapter 4:  Main Menu

58  

Send Feedback

Summary of Contents for MTP3100





































































































































Reviews: