Motorola MTP3100 User Manual Download

Page: 5 / 132

4.3.1 New Message.......................................................................................................... 54

4.3.1.1 Sending Messages to Private/Phone......................................................... 55

4.3.1.2 Sending Messages to Groups....................................................................55

4.3.1.3 Sending Store and Forward Messages......................................................55

4.3.1.4 Delivery Report.......................................................................................... 56

4.3.2 Inbox........................................................................................................................ 57

4.3.2.1 Entering the Inbox...................................................................................... 57

4.3.2.2 Receiving New Messages..........................................................................58

4.3.2.3 Using Submenus in the Inbox and the Outbox...........................................58

4.3.2.4 Embedded Number.................................................................................... 58

4.3.2.5 Storing Numbers from Messages...............................................................58

4.3.2.6 Calling Numbers in Messages................................................................... 59

4.3.2.7 Making Group Calls on the Talkgroup of the Message Sender................. 59

4.3.2.8 Immediate Message...................................................................................60

4.3.3 Outbox..................................................................................................................... 60

4.3.4 Call-Out (CO) Box....................................................................................................60

4.3.4.1 Call-Out Icons............................................................................................ 61

4.3.5 Radio Messenging System (RMS) Box....................................................................61

4.3.6 Wireless Application Protocol (WAP) Box................................................................61

4.3.7 Templates................................................................................................................ 61

4.3.7.1 Sending User-Defined Templates.............................................................. 61

4.3.7.2 Managing User-Defined Templates........................................................... 62

4.3.8 Predefined Templates..............................................................................................62

4.3.8.1 Viewing Predefined Templates.................................................................. 62

4.3.8.2 Sending Predefined Templates..................................................................62

4.3.9 Status Messages..................................................................................................... 62

4.3.9.1 Viewing a Status Message Number........................................................... 63

4.3.9.2 Sending Status Messages......................................................................... 63

4.3.9.3 Targeted Status Messages........................................................................ 63

4.3.10 Sending an RMS Status.........................................................................................64

4.3.11 Additional Address................................................................................................. 64

4.3.11.1 Enabling or Disabling Additional Address................................................ 64

4.3.11.2 Selecting Additional Address................................................................... 65

4.3.11.3 Viewing Additional Address......................................................................65

4.3.11.4 Entering New Additional Address.............................................................65

4.3.11.5 Editing Additional Address....................................................................... 65

4.3.11.6 Deleting Additional Address..................................................................... 66

4.3.12 Call-Out Availability................................................................................................66

4.3.12.1 Setting Call-Out Availability......................................................................66

68015000897–FC

Contents

Send Feedback

Summary of Contents for MTP3100




































































































































Search results

Summary of Contents for MTP3100

Reviews:

Related manuals for MTP3100

Brands by name

Popular brands

Motorola MTP3100, User Manual

Search results

Summary of Contents for MTP3100

Reviews:

Related manuals for MTP3100

Brands by name

Popular brands