Motorola MTP3100 User Manual Download

Page: 111 / 132

• Gray – you are logged off

Radio States

• Full Service – user logon was successful. Your radio has full functionality.

• Limited Service – user not logged on. Specified by the service provider.

• Pseudo Log On – occurs only in the Local Site Trunking (LST). You radio has full functionality

available (depending on the service provider settings) except some services like forwarding calls.
The RUI Pseudo Log On icon is displayed.

Book On

Your service provider assigns particular radio to one person for a predefined period of time. You are
only going to see the screen with your login and the full service is granted.

Force Off

Your service provider can log you off. Radio displays

Force Off

5.13

SIM Card End-to-End Encryption

The table below presents interactions occurring between radios with and without SIM card. SIM card
provides End-to-End Encryption.

NOTICE:

This is a BSI feature only.

Table 17: Radios Interactions

Transmission
Type

Transmitting Ra-
dio

Receiving Radio

Result

Private Call

SIM card

No SIM card

Call is not visible for the re-
ceiving radio. The transmit-
ting radio displays

Called

Party Clear Only

mes-

sage.

Private Call

No SIM card

SIM card

Warning: clear call

message appears and the
call is received.

Group Call

SIM card

No SIM card

Call is not visible for the re-
ceiving radio.

Group Call

No SIM card

SIM card

Warning: clear call

message appears and the
call is received.

Message

SIM card

No SIM card

Delivery failed

notifica-

tion appears and the mes-
sage is not received.

Message

No SIM card

SIM card

Message is received.

NOTICE:

To send a message or call a non-SIM card radio, turn off the SIM card End-to-End

Encryption.

68015000897–FC

Chapter 5: Features

Send Feedback

111

Summary of Contents for MTP3100




































































































































Search results

Summary of Contents for MTP3100

Reviews:

Related manuals for MTP3100

Brands by name

Popular brands

Motorola MTP3100, User Manual

Search results

Summary of Contents for MTP3100

Reviews:

Related manuals for MTP3100

Brands by name

Popular brands