Motorola MTP3100 User Manual Download

Page: 66 / 132

Press

Menu

key.

Select

Edit

Press

Change

Enter new values of the Alias and ISSI/ITSI/GSSI fields, press

Done

key.

The changed alias appears in the list of available aliases. There is no possibility to have two Additional
Address items with the same Additional Address Alias.

4.3.11.6

Deleting Additional Address

Prerequisites:

Deleting Additional Address is allowed only for User-Defined positions. Pre-Defined

positions can only be Selected and Viewed.

Procedure:

From the home screen, press the

Menu

key.

Select

Messages

→

Additional Address

→

Select Address

Scroll to select the alias of the Additional Address you wish delete.

Press the

Menu

key.

Select

Delete

and confirm deletion by the

key.

4.3.12

Call-Out Availability

This menu item enables or disables the Call-Out availability.

NOTICE:

This feature is only available when enabled by your service provider.

4.3.12.1

Setting Call-Out Availability

Procedure:

From the home screen, press the

Menu

key.

Select

Messages

→

Call-Out Availability

Select one of the following:

•

Available

•

Not available

4.4

Contacts

This menu stores all your contact numbers. Each entry requires the following information:

•

Name

– if you store more than one number to one contact, this entry is required.

68015000897–FC
Chapter 4: Main Menu

Send Feedback

Summary of Contents for MTP3100




































































































































Search results

Summary of Contents for MTP3100

Reviews:

Related manuals for MTP3100

Brands by name

Popular brands

Motorola MTP3100, User Manual

Search results

Summary of Contents for MTP3100

Reviews:

Related manuals for MTP3100

Brands by name

Popular brands