Motorola MTP3100 User Manual Download Page 45

Page: 45 / 132

NOTICE:

Your service provider can disable this mode.

3.2.1

Entering Local Site Trunking

When your radio receives a Local Site Trunking indication from the system, the following occurs:

• Your radio plays an

Entering Local Site Trunking

tone.

• Display shows the

Local Area Service

message.

• Display icons and soft keys turn olive.

NOTICE:

Noticeable only on the color display.

• Any call in progress is dropped upon entering Local Site Trunking Mode.

If configured by your service provider, this message/alert is periodically repeated to remind you that
your radio is still operating in Local Site Trunking Mode. The following features are available:

• Registration

• Attachment

• Group Call

• Emergency Call

• Emergency Alarm

3.2.2

Exiting Local Site Trunking

When the link with the central network controller is reestablished, your radio exits Local Site Trunking,
and the following occurs:

• Your radio plays an

Exiting Local Site Trunking

tone.

• Any call in progress during Local Site Trunking is dropped.

• Display icons and soft keys turn blue.

3.3

Direct Mode Operation

Direct Mode Operation (DMO) is a mode of simplex operation where radios communicate directly
without the need of a network.

68015000897–FC

Chapter 3: Modes

Send Feedback

Summary of Contents for MTP3100




































































































































Search results

Summary of Contents for MTP3100

Reviews:

Brands by name

Popular brands

Motorola MTP3100, User Manual

Search results

Summary of Contents for MTP3100

Reviews:

Brands by name

Popular brands