Motorola MTP3100 User Manual Download

Page: 71 / 132

NOTICE:

Your service provider can determine the following elements for PTT button:

- Lock all buttons.

- Lock radio PTT button only when RSM is connected.

NOTICE:

If no RSM is connected when powering up the radio, radio PTT button is

useable. If an RSM is connected when powering up the radio, radio PTT button is
locked. Disconnecting a connected RSM requires restarting of the radio to unlock
the radio PTT button.

- Lock accessories PTT button only.

NOTICE:

Bluetooth PTT is not affected.

• Volume Control.

• Talk Group Selection.

• Side buttons.

• Lock on Start-Up.

• The Soft keys.

• The Power-Off key.

The

Emergency

button is always operative.

4.6.2.1

Keypad Lock Notification

When the keypad is locked, your service provider can configure one of the following instructions:

• None – no notification is displayed.

• Notification Only –

Keys Locked

is displayed.

• Notification and Instruction –

Press Menu + Left to lock/unlock keypad

is displayed.

4.6.2.2

Setting Automatic Keylock Delay

Procedure:

From the home screen, press the

Menu

key.

Select

Security

→

Keylock Setup

→

Delay

Use

and

Down

Navigation keys to change the minutes and press

Done

4.6.2.3

Setting Keylock on Startup

Procedure:

From the home screen, press the

Menu

key.

Select

Security

→

Keylock Setup

→

Start Locked

Select

Off

68015000897–FC

Chapter 4: Main Menu

Send Feedback

Summary of Contents for MTP3100




































































































































Search results

Summary of Contents for MTP3100

Reviews:

Related manuals for MTP3100

Brands by name

Popular brands

Motorola MTP3100, User Manual

Search results

Summary of Contents for MTP3100

Reviews:

Related manuals for MTP3100

Brands by name

Popular brands